0.96 Inch OLED Display Vertical Type White 128x64 Dots SH1107 13PIN Soldering FPC
A 0.96-inch OLED display with the SH1107 driver is another popular small OLED display, often used in microcontroller projects. It is similar in size and functionality to displays using other controllers like SSD1306, but it has some differences in terms of its communication and display handling.
Key Features of 0.96-inch OLED (SH1107):
- Driver IC: SH1107 is the controller that drives the display.
- Resolution: Typically 128x64 pixels.
- Display Type: Monochrome (black and white) OLED.
- Size: 0.96 inches diagonally.
- Communication Protocol: Typically uses I2C or SPI for communication, though I2C is more common.
- Interface: The SH1107 is compatible with both I2C and SPI interfaces, but the I2C interface is more widely used in smaller projects.
Detailed Parameters:
| 1 | Brand Name | Genyu |
| 2 | Model Number | GY64128-01 |
| 3 | Display Mode | OLED(Organic Light Emitting Diode) |
| 4 | Color | White |
| 5 | Size | 0.96 inch |
| 6 | Dot Matrix | 64*128 Pixels |
| 7 | Module Size | 14.0(W)x28.0(H)x1.227(D) mm |
| 8 | View Area | 11.86 (W) x 22.74(H) mm |
| 9 | Active Area | 10.86 (W) x 21.74(H) mm |
| 10 | Dot Size | 0.15(W)*0.15(H) mm |
| 11 | Dot Pitch | 0.17(W)*0.17(H) mm |
| 12 | Drive IC | SH1107 |
| 13 | Interface | 4-wire serial, I2C |
| 14 | FPC Connector | 13PIN, soldering |
| 15 | Voltage | VDD=1.65~3.3V, Vin=8.5~9.5V |
| 16 | Viewing Angle | 160° |
OLED Screens ( 0.42 inch~3.12 inch ):
We mainly develop small-middle sizes OLED displays, including 0.42", 0.49", 0.66", 0.78", 0.87", 0.91", 0.96", 1.12", 1.21", 1.3", 1.5", 1.54", 1.92", 2.08", 2.23", 2.42", 2.7", and 3.12", etc.
We can customize the FPC, Interface, Touch Panel, and PCB board based on your demands.
Advantages of SH1107 over Other Controllers:
-
Higher Compatibility: While the SSD1306 is more common, the SH1107 is also well-supported and works well in small devices where memory addressing or specific display functions are required.
-
More Advanced Features: The SH1107 may offer better graphical capabilities and more efficient handling of complex displays due to its memory handling and driver capabilities.
Differences Between SH1107 and SSD1306:
-
Addressing: The SH1107 has a different memory addressing scheme compared to the SSD1306, which means it might not be directly compatible with libraries meant for the SSD1306 (although many libraries will work with both).
-
Interface Control: The SH1107 has a slightly different initialization sequence and control commands than the SSD1306, so specific libraries or configurations are necessary.
Pinout for SH1107 OLED (I2C version):
If you're using a 0.96-inch SH1107 OLED display with I2C communication, the common pins are:
-
VCC: Power supply (typically 3.3V or 5V).
-
GND: Ground.
-
SCL: Serial Clock Line (I2C).
-
SDA: Serial Data Line (I2C).
-
RES (Reset): Reset pin (optional for I2C, typically tied low for I2C).
-
DC (Data/Command): Data/Command pin (used for SPI, typically tied low for I2C).
FAQ
1. Q: What products can you provide?
A. 1) Custom Segment LCD Display;
2) Monochrome Graphic/Dot Matrix LCD Display Modules;
3) Micro OLED Display Modules;
4) Color TFT LCD Display Panels;
5) LED Backlights.
2. Q: Where is your factory?
A. Our office is in Shenzhen, Guangdong and our factory is in Jiangxi Province.
3. Q: Will you offer a free sample?
A: For the first cooperation, samples will be charged, and the amount will be returned at the mass order stage.
4. Q: What is the delivery time?
A: For small orders: 7-15 days. For mass production: 25-30 days.
5. Q: Can I get a lower price for OLED displays?
A: Yes, cheaper price with bigger/larger quantities order.
6. Q: How do you control the quality of products?
A: All products are 100% inspected before shipment.
