0.96 Inch OLED Display Bicolor 128x64 Resolution SSD1306 30PIN Serial Interface
Electrical Specifications:
Display Characteristics:
-
Contrast Ratio: Excellent, with true blacks because the OLED pixels can be completely turned off.
-
Refresh Rate: Fast enough for smooth text and simple graphics (refresh rates of ~60Hz or higher are typical).
-
Font Rendering: Great for displaying text in small sizes, and can support basic pixel graphics.
-
Response Time: Fast response times with no motion blur.
Detailed Parameters:
| 1 | Brand Name | Genyu |
| 2 | Model Number | GY12864-04 |
| 3 | Display Mode | OLED(Organic Light Emitting Diode) |
| 4 | Color | Y&B |
| 5 | Size | 0.96 inch |
| 6 | Dot Matrix | 128*64 Pixels |
| 7 | Module Size | 26.7(W)x19.26(H)x1.41(D) mm |
| 8 | View Area | 23.74 (W) x 12.864(H) mm |
| 9 | Active Area | 21.74(W)*10.86(H) mm |
| 10 | Dot Size | 0.15(W)*0.15(H) mm |
| 11 | Dot Pitch | 0.17(W)*0.17(H) mm |
| 12 | Drive IC | SSD1306 |
| 13 | Interface | 6800/8080 interface, 4 wire serial interface, I2C |
| 14 | FPC Connector | 30PIN, soldering |
| 15 | Voltage | VDD=1.65~3.3V, Vin=3.5~4.2V |
| 16 | Viewing Angle | 160° |
OLED Screens ( 0.42 inch~3.12 inch ):
We mainly develop small-middle sizes OLED displays, including 0.42", 0.49", 0.66", 0.78", 0.87", 0.91", 0.96", 1.12", 1.21", 1.3", 1.5", 1.54", 1.92", 2.08", 2.23", 2.42", 2.7", and 3.12", etc.
Based on your demands, we can customize the FPC, Interface, Touch Panel, and PCB board.
Please let me know your requirements, we will suggest some models for your optional...
Pinout (for I²C):
The common pinout for a 0.96-inch SSD1306 OLED (I²C) display is:
-
VCC: Power supply (3.3V or 5V depending on your system).
-
GND: Ground.
-
SCL: Serial Clock Line (for I²C communication).
-
SDA: Serial Data Line (for I²C communication).
-
RES: Reset (optional depending on the module).
-
DC: Data/Command (used to indicate if the sent data is a command or display data).
-
CS: Chip Select (used for SPI interface, not needed for I²C).
For SPI, you would also need MOSI, SCK, and CS.
FAQ
1. Q: What products can you provide?
A. 1) Custom Segment LCD Display;
2) Monochrome Graphic/Dot Matrix LCD Display Modules;
3) Micro OLED Display Modules;
4) Color TFT LCD Display Panels;
5) LED Backlights.
2. Q: Where is your factory?
A. Our office is in Shenzhen, Guangdong and our factory is in Jiangxi Province.
3. Q: Will you offer a free sample?
A: For the first cooperation, samples will be charged, and the amount will be returned at the mass order stage.
4. Q: What is the delivery time?
A: For small orders: 7-15 days. For mass production: 25-30 days.
5. Q: Can I get a lower price for OLED displays?
A: Yes, cheaper price with bigger/larger quantities order.
6. Q: How do you control the quality of products?
A: All products are 100% inspected before shipment.
