1.3 Inch OLED Display White Fonts 128x64 Dots SSD1312 12PIN FPC Connector
The 1.3-inch OLED display with the SSD1312 controller is a small, high-resolution OLED display commonly used in various embedded and DIY electronics projects. Like other OLED displays, it offers excellent contrast, low power consumption, and a compact form factor, making it ideal for small handheld devices, wearables, and IoT applications.
Key Features of 1.3-inch OLED (SSD1312):
- Display Size: 1.3 inches (diagonal).
- Resolution: 128x64 pixels (monochrome).
- Controller IC: SSD1312.
- Interface: Supports I2C or SPI communication (though I2C is more commonly used).
- Color: Monochrome (usually black and white, though some color versions may exist).
- Low Power Consumption: OLED displays are energy-efficient, especially for dark content.
- Excellent Contrast: OLED provides true blacks and vibrant colors due to each pixel being individually controlled.
Detailed Parameters:
| 1 | Brand Name | Genyu |
| 2 | Model Number | GY64128-03-C12 |
| 3 | Display Mode | OLED(Organic Light Emitting Diode) |
| 4 | Color | White |
| 5 | Size | 1.3 inch |
| 6 | Dot Matrix | 64*128 Pixels |
| 7 | Module Size | 17.1(W) x 35.8(H) x 1.43(D) mm |
| 8 | View Area | 15.06 (W) x 30.42(H) mm |
| 9 | Active Area | 14.10 (W) x 28.82(H) mm |
| 10 | Dot Size | 0.21(W)*0.21(H) mm |
| 11 | Dot Pitch | 0.23(W)*0.23(H) mm |
| 12 | Drive IC | SSD1312 |
| 13 | Interface | 4-wire SPI, I2C |
| 14 | FPC Connector | 12PIN, socket type |
| 15 | FPC Pitch | 0.5 mm |
| 16 | Viewing Angle | 160° |
OLED Screens ( 0.42 inch~3.12 inch ):
We mainly develop small-middle sizes OLED displays, including 0.42", 0.49", 0.66", 0.78", 0.87", 0.91", 0.96", 1.12", 1.21", 1.3", 1.5", 1.54", 1.92", 2.08", 2.23", 2.42", 2.7", and 3.12", etc.
We can customize the FPC, Interface, Touch Panel, and PCB board based on your demands.
Power Considerations:
- Most 1.3-inch OLED displays can run on either 3.3V or 5V (depending on the display version). However, if you're using a microcontroller like the ESP32, make sure to power the OLED display with a voltage that matches its requirement (3.3V for some displays).
SSD1312 vs SSD1306:
-
SSD1312 is a less common controller than the SSD1306, but it is quite similar in terms of functionality. It can support both I2C and SPI interfaces.
-
The key difference lies in how the memory is organized and the initialization process. So, while they are functionally similar, using the wrong library or settings can lead to issues with display rendering.
Pinout for 1.3-inch OLED (SSD1312, I2C):
The pinout for a typical 1.3-inch OLED with SSD1312 can be the following (for an I2C version):
-
VCC: Power supply (typically 3.3V or 5V depending on the display model).
-
GND: Ground.
-
SCL: Serial Clock Line (I2C).
-
SDA: Serial Data Line (I2C).
-
RES (Reset): Reset pin (optional in some I2C displays).
-
DC (Data/Command): Data/Command pin (typically tied to ground for I2C, not used for I2C communication).
FAQ
1. Q: What products can you provide?
A. 1) Custom Segment LCD Display;
2) Monochrome Graphic/Dot Matrix LCD Display Modules;
3) Micro OLED Display Modules;
4) Color TFT LCD Display Panels;
5) LED Backlights.
2. Q: Where is your factory?
A. Our office is in Shenzhen, Guangdong and our factory is in Jiangxi Province.
3. Q: Will you offer a free sample?
A: For the first cooperation, samples will be charged, and the amount will be returned at the mass order stage.
4. Q: What is the delivery time?
A: For small orders: 7-15 days. For mass production: 25-30 days.
5. Q: Can I get a lower price for OLED displays?
A: Yes, cheaper price with bigger/larger quantities order.
6. Q: How do you control the quality of products?
A: All products are 100% inspected before shipment.
